Centimeters to Inches Converter
cm
→
Inches:
0
in
Rounded:
0
in
Choose a Mount Type: Inside Mount or Outside Mount
1. Measure Depth
Measure the depth of the location where the drapes will be installed.
Important
For ceiling-mounted drapery tracks, please ensure there is enough flat ceiling space to accommodate the system.
-
A minimum of 5 inches is required for single-layer drapery.
-
For double-layer setups (such as sheers and blackout drapery), at least 9 inches of flat space is recommended.
2. Measure Order Width
Measure the exact width you want the drapes to cover.
Important
If you want the window to be fully visible when the drapery is open, please enter your window width in the Drapery Product Description to get the recommended order width.
3. Measure Order Height
Measure and determine the desired height for the drapes. Recommend ½″ gap from fabric to floor.
The order height is the total height from the top of the track to the bottom of the drapery fabric.
Note
For ceiling-mounted drapes, no deductions will be made during production. The product will be manufactured according to the exact measurements you provide.
1. Measure Order Width
Measure the exact width you want the drapes to cover.
Important
If you want the window fully exposed when the drapes are fully open, make sure the order width is at least 35% wider than the window width. For example, if your window is 100 inches wide, your order width should be at least 135 inches.
2. Measure Order Height
Measure and determine the desired height for the drapes. Recommend ½″ gap from fabric to floor.
The order height is the total height from the top of the track to the bottom of the drapery fabric.
Note
For side-mounted drapes, no deductions will be made during production. The product will be manufactured according to the exact measurements you provide.
